100w Monocrystalline Rigid Solar panel Kit


Out of stock

Category: Tags: ,


Solar Kit Contents
100 Watt Monocrystalline Solar Panel with 1M cable & MC4 plugs attached
5 Metre Solar Power Extension Cable with MC4 Connectors
10A PWM Solar Charge Controller including USB
4X corner heavy duty molded plastic solar panel mounting brackets & cable entry

Solar Panel
100w  Mono-Crystalline Solar Panel with 1m cable & MC4 Connector Plugs
Lightweight design with rigid anodised aluminium alloy frame and toughened glass
Designed in the UK. CE, TUV, ISO 9001 quality assurance.

purest silicone 16-20% efficiency
performs better in lower light levels i.e. in overcast skies
longest life with lowest rate of performance loss of only 0.36% per year, therefore a 100w panel would be around 91w after 25 years
better heat tolerance, i.e. performs better on hot summer days
Monocrystalline panels are 2 to 4% more efficient than polycrystalline.
Weight – 6.9kg
Dimension 1000mm x 670mm x 30mm

Solar Panel Battery Charge Regulator Controller 12V / 24V Auto Switching
Solar charge controllers are required to regulate the power output from the solar panels to ensure effective charge of a typical 12V or 24V lead acid battery without overload. PWM (Pulse Wave Modulation) solar charge controller provide a cost effective solar charger for the solar panel outputs in our range. Optimised charge control which helps to prolong the life of the battery. 3-6% more effective than non-PWM charge controllers. LED indicator light to show battery state. Uses industrial grade micro-controller chip to work in a wide range of temperatures and humidity

4pcs ABS moulded plastic brackets (4 corners)

Ideal for bonding to the roof – no need for drilling; Strong side support for larger solar panels; Great for motorhomes, campervans, caravans, lorries, buses, boats and yachts; Can also be used on flat roofs of buildings, sheds, garages or other flat surfaces; Easy Installation, holes should be drilled in each bracket, and corresponding holes in the solar panel frame on each side; then brackets should be fixed to the solar panel using self-tapping screws (not included). Finally, brackets can be bonded to the roof using an appropriate sealant or adhesive tape (not included) – sealant is recommended for stronger bonding.
Material: tough heavy duty moulded plastic, Colour: white, brackets dimensions 15x15x6.5cm; Cable Entry – Watertight cable entry for 4-12mm cables, Easily bonded to the surface using a suitable sealant. Can be used as a single cable gland (plugs for closing cable holes included), Material: tough moulded plastic, colour: white, Size: 12x10x5cm.